Comments / axle vent

Hi Friends!

First, my Blog Guru (brother) is looking into letting you guys post some comments. The problem is with spam and internet robots taking over. Might have to do a login which could be too much trouble for you. Still looking into it.

Lots done this week!

First, the axle vent. My Moser axle comes with a 1/4 NPT vent hole and a brass hose fitting. F5 has you simply running a hose up high and securing it so water doesnt get in.  Gotta be better, so I ordered this Ford axle vent that fits certain 86-14 Mustangs with the 8.8 axle. PN 4R3Z4022AA. Problem: the vent has a 7/16-20 thread, or a -4AN. So I also got this fitting from Earls, PN 916144. Install is easy-peesy and much better than a hose snaking all over the place.

Few things have happened

I have fixed a small coolant leak at the heater select valve, and replaced the power steering pump with a unit that is setup and dyno’d for flow and pressure to match the Fox Mustang steering rack. Also has a reservoir mounted right to the side of the pump for excellent fluid supply.



  • 壯陽藥的選擇技巧


即使兩次服用的劑量合起來不超過20mg的安全劑量,大部分陽痿患者每次服用 樂威壯都會想到服用10毫克效果夠不夠?需不需要增加到20毫克?吃最大劑量會不會損害人體健康?